For the Samsung Dryer families covered by the source set, **bC2** means **jammed / stuck button error**. The first useful step is to preserve the exact characters and model number before power cycling the appliance. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **bC2**. Search normalization stores it as **BC2** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error codeBC2
ApplianceDryer
Quick answer
Jammed / stuck button error.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so BC2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
For the Samsung Dryer families covered by the source set, **bC2** means **jammed / stuck button error**. The first useful step is to preserve the exact characters and model number before power cycling the appliance. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **bC2**. Search normalization stores it as **BC2** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
While bC2 is active, one or more controls may not respond as expected or may appear held down.
Depending on the exact model, the appliance can beep, cancel, or refuse to start while the input is detected.
When the bC2 condition is present, the code may return immediately when the control panel self-check runs.
While bC2 is active, bC2 appears and drying can pause or performance may change because of jammed / stuck button error.
bC2 can be accompanied by this pattern: heat, airflow, motor, drainage, door, or sensor behavior may be affected depending on the code family.
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
As an external check for bC2, make sure no object, moisture, cleaner residue, or protective film is pressing the control.
Before opening any service area, dry and clean the exterior control surface without flooding it.
A safe owner-level check is to try the documented Control Lock/Child Lock procedure if relevant.
As an external check for bC2, do not open the panel to bypass a stuck key.
For bC2, start by doing this: record the code and whether the dryer is vented or heat-pump/ventless.
Before requesting service for bC2, clean/inspect lint filter, heat exchanger, water tank/drain, and external vent only when relevant.
Important safety warning. Stop for burning smell, smoke, gas odor, repeated breaker trips, or abnormal overheating. Do not bypass thermal protection. If resolving bC2 would require energized internal access, that is the point to hand the diagnosis to a qualified technician.
Get help
When to request repair service
If the owner-accessible checks do not clear bC2, If the control is clean and unobstructed but the input code returns, the keypad, harness, or control board may require diagnosis. The repair should confirm the monitored function and its feedback before any board or component is condemned.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Resetting can clear a temporary state, not a persistent issue. If **bC2** comes back, preserve the code and move to the safe checks or model-specific service path.
That depends on the accompanying symptom. A code with no safety hazard may allow a short diagnostic check, but **bC2** should not be ignored if performance is deteriorating or the display keeps returning.
No. **bC2** tells you which condition or check the control detected. The same display can result from the named component, its wiring, a connector, a supply/airflow/water condition, or the control that reads it.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Dryer bC2** separate from same-looking codes used by other Samsung appliance families.
