If a Samsung dryer shows **tE**, the verified Samsung meaning in this research set is **temperature / temperature-sensor error**. Use the code to narrow the diagnosis, then confirm the exact model because code scope can change by product generation or region. Samsung uses overlapping code conventions across model years and regions. This page keeps the appliance context attached to the code so a same-looking string from another product family is not misapplied. The recorded display form is **tE**. Search normalization stores it as **TE** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error codeTE
ApplianceDryer
Quick answer
Temperature / temperature-sensor error.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so TE may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
If a Samsung dryer shows **tE**, the verified Samsung meaning in this research set is **temperature / temperature-sensor error**. Use the code to narrow the diagnosis, then confirm the exact model because code scope can change by product generation or region. Samsung uses overlapping code conventions across model years and regions. This page keeps the appliance context attached to the code so a same-looking string from another product family is not misapplied. The recorded display form is **tE**. Search normalization stores it as **TE** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
When the tE condition is present, the control may stop or limit operation because a temperature reading is missing or implausible.
The tE display becomes more meaningful if heating, cooling, drying, or defrost behavior can become inconsistent.
While tE is active, the display may return at a similar stage each time the affected sensor is checked.
When the tE condition is present, tE appears and drying may pause or performance may change because of temperature / temperature-sensor error.
A symptom that fits tE is that heat, airflow, motor, drainage, door, or sensor behavior can be affected depending on the code family.
Why it happens
Possible causes
varies by model/region — cross-region baseline — Temperature / temperature-sensor error
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
A safe owner-level check is to record when the code appears and whether the appliance had just heated, cooled, or defrosted.
The next non-invasive check is to confirm vents, doors, filters, and ambient conditions are normal where they affect the sensor reading.
As an external check for tE, use the exact model manual before assuming the sensor itself is defective.
A safe owner-level check is to record the code and whether the dryer is vented or heat-pump/ventless.
Before requesting service for tE, clean/inspect lint filter, heat exchanger, water tank/drain, and external vent only when relevant.
Before opening any service area, stop repeated resets if the code returns; model-specific electrical/refrigeration diagnosis may be required.
Important safety warning. Safety takes priority over clearing tE. Stop for burning smell, smoke, gas odor, repeated breaker trips, or abnormal overheating. Do not bypass thermal protection.
Get help
When to request repair service
Persistent temperature-sensor codes usually require resistance/connection checks at the sensor, harness, and control—work best done with the model-specific service procedure. In a service visit for tE, model-specific testing should follow the temperature / temperature-sensor error circuit rather than treating the code as proof of one failed part.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
One controlled restart is reasonable after correcting an obvious external issue. A recurring **tE** display should be treated as diagnostic evidence, not as a reason to keep rebooting the appliance.
Continue only if the appliance is otherwise safe and the owner-level checks are appropriate. Stop for leakage near electrical parts, smoke, burning odor, arcing, gas concerns, repeated breaker trips, uncontrolled heating, or unsafe temperatures.
Treat **tE** as a starting point, not a replacement instruction. Wiring, feedback signals, operating conditions, and electronic controls can mimic a failed component.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Dryer tE** separate from same-looking codes used by other Samsung appliance families.
