Seeing **tE5** on a Samsung dryer narrows the problem to **compressor temperature-sensor issue**. What you do next depends on whether the code is an issue, a normal status/test message, or a model-dependent interpretation. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **tE5**. Search normalization stores it as **TE5** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error codeTE5
ApplianceDryer
Quick answer
Compressor temperature-sensor issue.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so TE5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Seeing **tE5** on a Samsung dryer narrows the problem to **compressor temperature-sensor issue**. What you do next depends on whether the code is an issue, a normal status/test message, or a model-dependent interpretation. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **tE5**. Search normalization stores it as **TE5** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
Depending on the exact model, the control may stop or limit operation because a temperature reading is missing or implausible.
Depending on the exact model, heating, cooling, drying, or defrost behavior can become inconsistent.
One clue that supports the tE5 diagnosis is that the display may return at a similar stage each time the affected sensor is checked.
On affected Samsung dryer models, tE5 appears and drying may pause or performance may change because of compressor temperature-sensor issue.
tE5 can be accompanied by this pattern: heat, airflow, motor, drainage, door, or sensor behavior can be affected depending on the code family.
Why it happens
Possible causes
varies by model — official regional/current support — Compressor temperature-sensor issue
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Before opening any service area, record when the code appears and whether the appliance had just heated, cooled, or defrosted.
Before opening any service area, confirm vents, doors, filters, and ambient conditions are normal where they affect the sensor reading.
To rule out an accessible cause, use the exact model manual before assuming the sensor itself is defective.
With tE5 recorded, record the code and whether the dryer is vented or heat-pump/ventless.
For tE5, start by doing this: clean/inspect lint filter, heat exchanger, water tank/drain, and external vent only when relevant.
A safe owner-level check is to stop repeated resets if the code returns; model-specific electrical/refrigeration diagnosis may be required.
Important safety warning. Stop for burning smell, smoke, gas odor, repeated breaker trips, or abnormal overheating. Do not bypass thermal protection. If resolving tE5 would require energized internal access, that is the point to hand the diagnosis to a qualified technician.
Get help
When to request repair service
Persistent temperature-sensor codes usually require resistance/connection checks at the sensor, harness, and control—work best done with the model-specific service procedure. In a service visit for tE5, model-specific testing should follow the compressor temperature-sensor issue circuit rather than treating the code as proof of one failed part.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
You can try the one reset Samsung documents for the model, but **tE5** returning afterward means the condition still exists. Note the operating stage instead of cycling power repeatedly.
That depends on the accompanying symptom. A code with no safety hazard may allow a short diagnostic check, but **tE5** should not be ignored if performance is deteriorating or the display keeps returning.
The code alone is not enough to justify a part. **tE5** should narrow testing to the affected function; the final cause still has to be verified on the exact model.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Dryer tE5** separate from same-looking codes used by other Samsung appliance families.
