Samsung Microwave code **E-42** is associated with **short easy/ph sensor error**. The display identifies the system or condition the control detected, but it does not by itself prove which individual part should be replaced. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **E-42**. Search normalization stores it as **E42** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error codeE42
ApplianceMicrowave
Quick answer
Short Easy/PH sensor error.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so E42 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Samsung Microwave code **E-42** is associated with **short easy/ph sensor error**. The display identifies the system or condition the control detected, but it does not by itself prove which individual part should be replaced. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **E-42**. Search normalization stores it as **E42** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
The E-42 display becomes more meaningful if the control is not receiving an expected sensor signal or the signal is outside its accepted range.
When the E-42 condition is present, the appliance may stop a feature, limit operation, or repeat the code during the same stage.
The E-42 display becomes more meaningful if the affected function can behave intermittently if the signal or connection is unstable.
When the E-42 condition is present, e-42 appears and the microwave can stop or limit the function associated with short easy/ph sensor error.
Why it happens
Possible causes
varies by model/region — cross-region baseline — Short Easy/PH sensor error
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
The next non-invasive check is to photograph the code and note the exact operating stage when it appears.
A safe owner-level check is to check only user-accessible conditions that can physically affect the monitored function.
The next non-invasive check is to avoid replacing a sensor solely from the display; wiring, connectors, supply conditions, and the control can create the same result.
A safe owner-level check is to record the exact code and model number.
Before opening any service area, power the microwave off for 60 seconds only if Samsung's model guidance allows a reset.
As an external check for E-42, do not remove the outer cabinet or access internal high-voltage components.
Important safety warning. When working around a microwave that shows E-42, keep the checks external and non-invasive. Do not remove the microwave outer cabinet. High-voltage components can retain dangerous energy even after the appliance is unplugged.
Get help
When to request repair service
If the code returns, model-specific sensor, harness, connector, and control-board testing is appropriate. In a service visit for E-42, model-specific testing should follow the short easy/ph sensor error circuit rather than treating the code as proof of one failed part.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Resetting can clear a temporary state, not a persistent issue. If **E-42** comes back, preserve the code and move to the safe checks or model-specific service path.
Do not keep operating the appliance through a hazardous symptom just to see whether **E-42** clears. If there is heat, water, electrical, gas, or food-safety risk, stop and arrange diagnosis.
No. **E-42** tells you which condition or check the control detected. The same display can result from the named component, its wiring, a connector, a supply/airflow/water condition, or the control that reads it.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Microwave E-42** separate from same-looking codes used by other Samsung appliance families.
