Samsung Oven & Range Error Code dE: Meaning, Checks & Repair
For the Samsung Oven & Range families covered by the source set, **dE** means **dual cook divider / partition position error**. The first useful step is to preserve the exact characters and model number before power cycling the appliance. A display code is evidence from the control system, not a component test result. That distinction matters because a connector, supply condition, obstruction, or feedback signal can mimic a failed component. The display variants retained for this lookup are **-dE-, dE**. They are grouped under normalized key **DE** so spacing, case, and separator differences do not create duplicate repair meanings.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error codeDE
ApplianceOven & Range
Quick answer
Dual Cook divider / partition position error.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so DE may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
For the Samsung Oven & Range families covered by the source set, **dE** means **dual cook divider / partition position error**. The first useful step is to preserve the exact characters and model number before power cycling the appliance. A display code is evidence from the control system, not a component test result. That distinction matters because a connector, supply condition, obstruction, or feedback signal can mimic a failed component. The display variants retained for this lookup are **-dE-, dE**. They are grouped under normalized key **DE** so spacing, case, and separator differences do not create duplicate repair meanings.
Signs
Symptoms you may notice
The dE display becomes more meaningful if the appliance can stop or limit the affected function when the code is detected.
When the dE condition is present, the same code can return at a repeatable stage of operation.
A symptom that fits dE is that other symptoms depend on the model and the subsystem named by Samsung.
On affected Samsung oven or range models, dE appears on the range/oven and the related cooking, sensing, door, or control function can be limited.
Why it happens
Possible causes
varies by model/region — cross-region baseline — Dual Cook divider / partition position error
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
The next non-invasive check is to record the exact code, model number, and operating stage before resetting power.
A safe owner-level check is to complete only the owner-accessible checks described in the model manual.
Before requesting service for dE, do not replace parts solely from a display code when wiring, conditions, or control feedback can create the same result.
With dE recorded, record the exact code and model number.
With dE recorded, check door/divider/pan placement, vent obstruction, settings, and household power only when relevant.
To rule out an accessible cause, do not perform live high-voltage internal testing; request service if the code returns.
Important safety warning. Safety takes priority over clearing dE. Stop for arcing, repeated breaker trips, uncontrolled heating, damaged wiring, or gas odor. Internal live-voltage and gas-system diagnosis is not a homeowner check.
Get help
When to request repair service
If the code returns after the documented basic checks, request model-specific diagnosis of the affected subsystem. In a service visit for dE, model-specific testing should follow the dual cook divider / partition position error circuit rather than treating the code as proof of one failed part.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
One controlled restart is reasonable after correcting an obvious external issue. A recurring **dE** display should be treated as diagnostic evidence, not as a reason to keep rebooting the appliance.
Short owner-accessible checks may be reasonable when the appliance is safe. Persistent **dE**, worsening performance, or any electrical/water/heat hazard is a reason to stop use.
No. **dE** tells you which condition or check the control detected. The same display can result from the named component, its wiring, a connector, a supply/airflow/water condition, or the control that reads it.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Oven & Range dE** separate from same-looking codes used by other Samsung appliance families.
