Seeing **26E** on a Samsung refrigerator narrows the problem to **freezer / twin ice maker function error**. What you do next depends on whether the code is an issue, a normal status/test message, or a model-dependent interpretation. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **26E**. Search normalization stores it as **26E** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error code26E
ApplianceRefrigerator
Quick answer
Freezer / twin ice maker function error.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so 26E may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Seeing **26E** on a Samsung refrigerator narrows the problem to **freezer / twin ice maker function error**. What you do next depends on whether the code is an issue, a normal status/test message, or a model-dependent interpretation. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **26E**. Search normalization stores it as **26E** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
When the 26E condition is present, ice production, ejection, heating, sensing, or ice-room airflow can stop or become intermittent.
On affected Samsung refrigerator models, the bucket can remain empty, jam, or build abnormal frost.
One clue that supports the 26E diagnosis is that the code can return during an ice-maker test or normal harvest/fill cycle.
A symptom that fits 26E is that 26E appears and the refrigerator can show behavior related to freezer / twin ice maker function error.
A symptom that fits 26E is that cooling, airflow, ice-making, defrost, or temperature performance can become intermittent depending on the affected subsystem.
Why it happens
Possible causes
varies by model/region — cross-region baseline — Freezer / twin ice maker function error
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
A safe owner-level check is to check that the ice maker is enabled and the bucket is seated correctly.
With 26E recorded, confirm freezer/ice-room temperature and household water supply are normal where applicable.
To rule out an accessible cause, remove only loose accessible ice; do not chip ice with sharp tools or concentrated heat.
Before requesting service for 26E, use the exact model's Samsung ice-maker test/reset procedure.
Before requesting service for 26E, photograph the code before resetting or unplugging the refrigerator.
To rule out an accessible cause, verify doors, visible airflow/ice obstructions, water/ice-bin seating, or demo mode only when relevant.
Important safety warning. Protect food if temperatures are no longer safe. Do not open the sealed refrigeration system or energized inverter/compressor circuits. For 26E, stop troubleshooting immediately if the symptom crosses into a safety hazard rather than a normal diagnostic condition.
Get help
When to request repair service
Repeated ice-maker or ice-room codes can require sensor, heater, motor, fan, fill, wiring, or control diagnosis. A repeatable 26E event is more useful diagnostically than repeated resets, because it shows when the freezer / twin ice maker function error check is failing.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
You can try the one reset Samsung documents for the model, but **26E** returning afterward means the condition still exists. Note the operating stage instead of cycling power repeatedly.
Short owner-accessible checks may be reasonable when the appliance is safe. Persistent **26E**, worsening performance, or any electrical/water/heat hazard is a reason to stop use.
The code alone is not enough to justify a part. **26E** should narrow testing to the affected function; the final cause still has to be verified on the exact model.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Refrigerator 26E** separate from same-looking codes used by other Samsung appliance families.
References
Sources & references
Samsung Canada internal RF32FMQDBSR/AA service error-code pages (support-cacyber.samsung.com)
