Samsung Microwave code **E-44** is associated with **easy/ph sensor dry-up error**. The display identifies the system or condition the control detected, but it does not by itself prove which individual part should be replaced. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **E-44**. Search normalization stores it as **E44** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error codeE44
ApplianceMicrowave
Quick answer
Easy/PH sensor dry-up error.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so E44 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Samsung Microwave code **E-44** is associated with **easy/ph sensor dry-up error**. The display identifies the system or condition the control detected, but it does not by itself prove which individual part should be replaced. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **E-44**. Search normalization stores it as **E44** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
Depending on the exact model, the control is not receiving an expected sensor signal or the signal is outside its accepted range.
A symptom that fits E-44 is that the appliance can stop a feature, limit operation, or repeat the code during the same stage.
Depending on the exact model, the affected function can behave intermittently if the signal or connection is unstable.
When the E-44 condition is present, e-44 appears and the microwave may stop or limit the function associated with easy/ph sensor dry-up error.
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Before opening any service area, photograph the code and note the exact operating stage when it appears.
Before requesting service for E-44, check only user-accessible conditions that can physically affect the monitored function.
Before opening any service area, avoid replacing a sensor solely from the display; wiring, connectors, supply conditions, and the control can create the same result.
A safe owner-level check is to record the exact code and model number.
As an external check for E-44, power the microwave off for 60 seconds only if Samsung's model guidance allows a reset.
With E-44 recorded, do not remove the outer cabinet or access internal high-voltage components.
Important safety warning. Safety takes priority over clearing E-44. Do not remove the microwave outer cabinet. High-voltage components can retain dangerous energy even after the appliance is unplugged.
Get help
When to request repair service
For E-44, the service threshold is straightforward: If the code returns, model-specific sensor, harness, connector, and control-board testing is appropriate. Bring the exact model number and a photo of the display so the diagnosis stays tied to the documented Samsung code.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
You can try the one reset Samsung documents for the model, but **E-44** returning afterward means the condition still exists. Note the operating stage instead of cycling power repeatedly.
Do not keep operating the appliance through a hazardous symptom just to see whether **E-44** clears. If there is heat, water, electrical, gas, or food-safety risk, stop and arrange diagnosis.
Treat **E-44** as a starting point, not a replacement instruction. Wiring, feedback signals, operating conditions, and electronic controls can mimic a failed component.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Microwave E-44** separate from same-looking codes used by other Samsung appliance families.
