The **0F** display on a Samsung washing machine points to **overflow / too much water in the washer**. Treat it as a diagnostic direction rather than a parts order: operating conditions, wiring, sensors, actuators, and control electronics can overlap. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **0F**. Search normalization stores it as **0F** while preserving the characters a homeowner actually sees.
Reviewed by Ethan Mercer · Last reviewed August 17, 2026
Written by
Ethan Mercer Appliance Repair Content SpecialistPublished August 17, 2026Updated August 22, 2026Technically reviewed August 17, 2026
Content status:
Verified
Error code0F
ApplianceWasher
Quick answer
Overflow / too much water in the washer.
Model compatibility: Samsung can reuse or reformat codes across series and model years, so 0F may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The **0F** display on a Samsung washing machine points to **overflow / too much water in the washer**. Treat it as a diagnostic direction rather than a parts order: operating conditions, wiring, sensors, actuators, and control electronics can overlap. The useful diagnostic value of the code is the subsystem it identifies. A good repair process confirms the symptom, checks the accessible external conditions, and then follows the model-specific circuit only if the display returns. The recorded display form is **0F**. Search normalization stores it as **0F** while preserving the characters a homeowner actually sees.
Signs
Symptoms you may notice
On affected Samsung washing machine models, the appliance can enter a protective drain or stop condition.
On affected Samsung washing machine models, moisture can be present inside a base pan even when no puddle is visible outside.
Depending on the exact model, the code may return after a fill, drain, defrost, ice-making, or water-dispensing event.
On affected Samsung washing machine models, 0F appears during the washer stage associated with overflow / too much water in the washer.
Depending on the exact model, the cycle may pause, stop, retry, drain, or refuse to advance until the condition is cleared.
Why it happens
Possible causes
varies by model — official regional/current support — Overflow / too much water in the washer
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
With 0F recorded, stop use if water is near electrical parts or leaving the cabinet.
With 0F recorded, verify only visible user-accessible hoses, filters, doors, gaskets, and water connections.
Before opening any service area, check for excess suds where detergent is involved.
With 0F recorded, do not defeat or dry out a leak sensor repeatedly without locating why moisture reached it.
Before opening any service area, record the code and the cycle stage where it appears.
For 0F, start by doing this: check owner-accessible water supply, drain hose/filter, load balance, door, detergent, or power only when relevant.
Important safety warning. When working around a washing machine that shows 0F, keep the checks external and non-invasive. Disconnect power and stop use for active leakage near electrical parts, smoke, burning smell, or repeated breaker trips.
Get help
When to request repair service
Persistent leak/overflow detection needs the moisture source corrected. Internal leak tracing, valves, sensors, pumps, or wiring may require service. In a service visit for 0F, model-specific testing should follow the overflow / too much water in the washer circuit rather than treating the code as proof of one failed part.
Book your repair
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
One controlled restart is reasonable after correcting an obvious external issue. A recurring **0F** display should be treated as diagnostic evidence, not as a reason to keep rebooting the appliance.
Short owner-accessible checks may be reasonable when the appliance is safe. Persistent **0F**, worsening performance, or any electrical/water/heat hazard is a reason to stop use.
Treat **0F** as a starting point, not a replacement instruction. Wiring, feedback signals, operating conditions, and electronic controls can mimic a failed component.
The same-looking code can be reused on another Samsung appliance family or reformatted by region/model year. Match the appliance type and exact model before applying a meaning. This page therefore keeps **Washer 0F** separate from same-looking codes used by other Samsung appliance families.
